• Eucatex Double Solar Screen Varnish

The colors and patterns on this site are only for reference, there may be divergence between the colors on the screen and the real colors of products. Availability on request.

Maximum protection for wood surfaces

Eucatex Gloss Double Solar Screen offers the maximum protection for external and internal wood surfaces, such as entrances, window frames, doors, garden furniture or swimming pools, wood houses, counters, etc. It has a fungicidal action (anti-mould) and double solar filter which blocks the effect of the ultraviolet rays emitted by the sun, avoiding the premature deterioration of the varnish film and the wood. To do so, the Eucatex Double Solar Screen Varnish provides two years of high durability and protection.

Gloss finish


Alkyd resin modified with polyurethane, solvents of the aliphatic and aromatic hydrocarbon type, organometallic dryers, transparent pigments absorbing ultraviolet rays and additives. It does not contain benzene and heavy metals. This product is classified according to standard NBR 11.702 of the ABNT (Brazilian Technical Standards Association) Type
  with EucatexTorpentine m2/coat  

10% to 20%

10 to 12
40 to 50
¼ of Gallon (900 ml)
Gallon (3.6 liters)

Two to three coats with an
interval of 12 hours

Drying time: To touch from 4 to 6 hours
End: 24 hours
Foam roller Paintbrush or flat paintbrush *Spray gun

*For the Spray gun, use pressure between 2.2 and 2.8 kgf/cm² or 30 to 35 lbs/in.²
  • For a perfect finishing, in new woods of dry areas, use Eucatex Sealer for Wood  as an undercoat;
  • Removers in the wood can cause problems of drying and finishing in the coatings applied after the removal. If you use removers, clean the wood effectively to minimize the  occurrence of these problems;
  • In applying to new external woods, apply the Eucatex Double Solar Screen Varnish directly, diluting the first coat by 1:1 with turpentine to continue with coats and dilution indicated above;
  • The practical yield can vary due to the method of application, geometry of the structure, rugosity and absorption of the surface, thickness of the product layer deposited, atmospheric conditions and application technique;
  • In cases of resinous and/or contaminated woods, bathe them successively with Eucatex Thinner until the complete decontamination of the wood.

According to ABNT NBR 13.245.

  • Preparation: the surface must be firm, cohesive, clean, dry, without dust, fatty materials, and mould.
  • Surfaces with gloss: they should be sanded until they are completely matt before starting to apply the varnish.
  • Surfaces with fatty stains: they should be washed with a solution of water and neutral detergent. Then, rinse them well, wait for them to dry and apply the product.
  • New woods not dry: they must receive successive applications of Thinner until the complete elimination of the natural resin of the wood, which can damage the paint.
  • New dry woods: sand the surface to eliminate splinters and remove the residue. In non-wettable areas, apply a coat of Eucatex Sealer for Concentrated Wood, diluted 100% with Eucatex Thinner. After the drying, sand again and eliminate the dust.
  • Repainting: remove loose parts, sand to remove the gloss and make a new application.